Модулі контролерів доступу нового покоління H3C (у цьому документі іменуються AC) — це високопродуктивні модулі з багатим сервісом для бездротової мережі. Вони надають чудові послуги для доступу до WLAN у великих і середніх кампусах, бездротового покриття в MAN, покриття точки доступу Wi-Fi і розгортання філій. Вони можуть бездоганно працювати з апаратним і програмним забезпеченням комутатора S10500X, створюючи ідеальне уніфіковане дротове та бездротове рішення.
Апаратні характеристики

Item	LSUM1WCMX20RT (20G AC module) LSUM1WCMX40RT (40G AC module)
Applicable device	H3C S10500X switch series
Dimensions (H × W × D)	40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)
Weight	3.8 kg (8.38 lb)
Management port	1 × console port 1 × out-of-band management (OOBM) GE port
Power consumption	< 180 W
Temperature	Operating temperature: 0°C to 45°C (32°F to 113°F) Storage temperature: –40°C to +70°C (–40°F to +158°F)
Relative humidity (non-condensing)	Operating and storage humidity: 5% to 95%
Safety standard	UL 60950-1 CAN/CSA C22.2 No 60950-1 IEC 60950-1 EN 60950-1/A11 AS/NZS 60950 EN 60825-1 EN 60825-2 FDA 21 CFR Subchapter J
EMC standards	ETSI EN 300 386 V1.3.3:2005 EN 55024: 1998+ A1: 2001 + A2: 2003 EN 55022 :2006 VCCI V-3:2007 ICES-003:2004 EN 61000-3-2:2000+A1:2001+A2:2005 EN 61000-3-3:1995+A1:2001+A2:2005 AS/NZS CISPR 22:2004 FCC PART 15:2005 GB 9254:1998 GB/T 17618:1998
MTBF	≥ 55.6 years

Характеристики програмного забезпечення

Item		LSUM1WCMX20RT	LSUM1WCMX40RT
Basic capabilities	Supported APs without a license	0
	License type	1/4/8/16/32/64/128/512/1024
	Max number of manageable APs	1024	4096
	Max number of configurable APs	4096	16384
	Max number of SSIDs	1024	4096
	Forwarding capacity	20 Gbps	40 Gbps
802.11 MAC	802.11 protocol suite	Supported
	Hide SSID	Supported
	802.11g protection	Supported
	802.11n only	Supported
	Client quantity limit	SSID-based client quantity limit Radio-based client quantity limit
	Online client detection	Supported
	Automatic client aging	Supported
	Multi-country code	Supported
	User isolation	VLAN-based user isolation SSID-based user isolation
	20 MHz/40 MHz auto-switch in 40 MHz mode	Supported
	Local forwarding	Local forwarding based on SSID+VLAN
CAPWAP	Auto AP	Supported
	AC discovery (DHCP option 43 and DNS)	Supported
	IPv6 tunnel	Supported
	Network synchronization	Supported
	Jumbo frame forwarding	Supported
	AP preprovisioning	AP basic network settings such as static IP, VLAN, and AC's IP address
	NAT traversal between AP and AC	Supported
Roaming	Intra-AC Layer 2 and Layer 3 roaming	Supported
	Inter-AC Layer 2 and Layer 3 roaming	Supported
Access control	Open system, shared key authentication	Supported
	WEP-64/128, dynamic WEP	Supported
	WPA, WPA2	Supported
	TKIP	Supported
	CCMP	Supported (11n recommended)
	SSHv1.5/v2.0	Supported
	Wireless End-point Access Domination (EAD)	Supported
	Portal authentication	Supported, remote or external server
	Portal webpage redirection	SSID-based portal webpage redirection AP-based portal webpage redirection
	Portal by-pass proxy	Supported
	802.1X authentication	EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-MD5, EAP-SIM, LEAP, EAP-FAST, EAP offload (TLS, PEAP only)
	Local authentication	802.1X authentication, portal authentication, MAC authentication
	LDAP authentication	802.1X and portal access 802.1X EAP-GTC and EAP-TLS
	AP-based access control	Supported
	Guest access control	Supported
	VIP tunnel	Supported
	ARP anti-attack	Wireless SAVI
	SSID anti-spoofing	Username and SSID binding
	Domain- and SSID-based AAA server selection	Supported
	AAA server backup	Supported
	Local AAA server for wireless clients	Supported
	TACACS+	Supported
QoS	Priority mapping	Supported
	Layer 2 to Layer 4 traffic classification	Supported
	Rate limit	Granularity of 8 Kbps
	802.11e/WMM	Supported
	User profile-based access control	Supported
	Intelligent bandwidth limit (equal bandwidth share algorithm)	Supported
	Intelligent bandwidth limit (user specific)	Supported
	Intelligent bandwidth guarantee	Free flow for packets coming from every SSID when traffic is not congested, and minimum bandwidth specified for each SSID when traffic is congested
	QoS optimization for SVP phone	Supported
	Call Admission Control (CAC)	CAC based on client quantity or bandwidth
	End-to-end QoS	Supported
	AP uplink rate limit	Supported
WLAN resource management	Country code lock	Supported
	Dynamic frequency selection (DFC) and transmit power control (TPC)	Supported
	Dynamic transmit rate control	Supported
	Coverage hole detection and correction	Supported
	Load balancing mode	Traffic-based load balancing Session-based load balancing Radio group based load balancing (dual-band supported)
	Intelligent load balancing	Supported
	AP load balancing group	Auto-discovery and flexible setting
Security	Static blacklist	Supported
	Dynamic blacklist	Supported
	Whitelist	Supported
Others	Bonjour gateway	Supported
	Hotspot 2.0	Supported
	AC hierarchy	Central AC
	HA	IRF, license sharing, AC dual-link backup
	Third-party application	Facebook authentication, WeChat authentication